Need help?Do you have a question about the Fayat BOMAG BPR 50/55 D and is the answer not in the manual?
Provides an overview of BOMAG machines and the purpose of the manual.
Details the identification plates for the machine and its engine.
Specifies noise levels and vibration values for the machine's operation.
Covers general safety principles, signal words, and personal protective equipment.
Outlines fundamental rules for safe machine operation and risk management.
Provides safety and environmental guidelines for handling various fluids.
Explains the steps and checks required before starting the machine's engine.
Describes how to safely operate the machine, including parking procedures.
Covers general maintenance safety, working on engine, electrics, and cleaning.
Explains the meaning and importance of machine labels and warning signs.
Highlights critical safety precautions to follow before starting the machine.
Lists essential visual checks and functional tests before operation.
Details the procedure for checking and topping up the engine oil.
Explains how to check fuel level and the process of refuelling.
Describes the process for checking the condition of rubber buffers.
Covers folding down and adjusting the machine's steering rod.
Provides step-by-step instructions for starting the machine's engine.
Explains how to operate the machine safely, including handling stuck situations.
Details the procedure for safely parking the machine.
Explains the operation and interpretation of the ECONOMIZER system.
Provides instructions and safety precautions for loading the machine onto a vehicle.
Details how to secure the machine to a transport vehicle using lashing belts.
Highlights safety precautions and general advice for maintenance tasks.
Specifies permitted engine oils, fuels, and hydraulic oils for the machine.
Presents a comprehensive table of maintenance tasks and intervals.
Outlines routine checks and cleaning tasks to be performed weekly.
Lists maintenance tasks required annually or after 250 operating hours.
Covers maintenance tasks that should be performed based on specific conditions or needs.
Offers initial guidance on diagnosing and resolving machine malfunctions.
Provides instructions for starting the engine using the recoil starter.
Lists common engine problems, their possible causes, and solutions.
Addresses faults that may occur while the machine is in operation.
Explains the process for decommissioning and disposing of the machine at end-of-life.
General| Brand | Fayat |
|---|---|
| Model | BOMAG BPR 50/55 D |
| Category | Power Tool |
| Language | English |
To Next Page
