Need help?Do you have a question about the Fayat BOMAG BPR 60/65 D and is the answer not in the manual?
Provides an overview of BOMAG machines and the purpose of the manual.
Details the location and importance of machine and engine identification plates.
Specifies the physical dimensions of the machine in millimeters and inches.
Lists machine weights, travel characteristics, drive system, exciter system, and fluid capacities.
Details noise levels and vibration values according to harmonized standards.
Outlines fundamental safety rules, machine compliance, and warning sign explanations.
Identifies roles and responsibilities of operating company, experts, and drivers.
Covers general safety rules, inspections, modifications, and handling of defects.
Provides safety and environmental guidelines for handling diesel fuel, oil, and battery acid.
Details procedures and safety precautions for loading and transporting the machine.
Covers pre-start checks and engine starting procedures with safety warnings.
Explains safe operation practices, including persons in danger zone and parking.
Provides safety guidelines for refueling the machine to prevent hazards.
Outlines general safety rules and procedures for performing maintenance.
Specifies safety guidelines and procedures for repairing the machine.
Explains the importance of maintaining stickers and decals in legible condition.
Highlights critical safety precautions and warnings before operating the machine.
Lists essential visual checks and functional tests to perform before operation.
Provides step-by-step instructions for checking the engine oil level.
Details the procedure for checking and refuelling the machine with safety notes.
Explains how to inspect the rubber buffers for damage or wear.
Describes the procedure for adjusting and folding the steering rod.
Provides detailed steps and safety warnings for starting the machine's engine.
Explains how to operate the machine, including throttle and handle controls.
Details the procedure for safely parking and securing the machine.
Explains the function and operation of the ECONOMIZER system.
Provides instructions and safety precautions for lifting and loading the machine.
Details the correct methods for securing the machine onto a transport vehicle.
Outlines essential safety rules and preliminary steps for all maintenance tasks.
Covers necessary preparations, such as opening the protection hood, before maintenance.
Lists recommended fuels, lubricants, and their specifications for the machine.
Specifies maintenance tasks to be performed after initial operating hours.
Provides a summary of maintenance tasks based on service intervals (weekly, monthly, etc.).
Details the maintenance checks and cleaning required on a weekly basis.
Outlines the maintenance procedures to be performed monthly.
Describes the maintenance tasks required every six months.
Lists the maintenance procedures to be carried out annually.
Covers maintenance tasks that should be performed as needed, like cleaning.
Offers general advice on diagnosing and rectifying machine malfunctions.
Provides troubleshooting steps for starting the engine using the recoil starter.
Details the procedure and safety precautions for starting the engine using jump leads.
Identifies the location and rating of fuses within the machine.
Lists common engine problems, their possible causes, and remedies.
Addresses issues that may occur while the machine is in use and their solutions.
Provides guidance on troubleshooting the ECONOMIZER system's indicators.
Outlines the procedures for decommissioning and disposing of the machine.
General| Brand | Fayat |
|---|---|
| Model | BOMAG BPR 60/65 D |
| Category | Power Tool |
| Language | English |
To Next Page
