To Next PageTo Next Page
Need help?Do you have a question about the Fbt Maxx 9Sa and is the answer not in the manual?
Do not open the unit to avoid electric shock. Refer servicing to qualified personnel.
Do not expose the equipment to rain or moisture to prevent fire or electric shock.
Use screened microphone cables and proper mic positioning to avoid feedback and noise.
Instructions for mounting the speaker using a bracket, ensuring all fixing holes are used.
Details the FBTMaxX9 subwoofer's construction, power, and advanced protection systems.
Explanation of the A.D.A.P. processor and the volume potentiometer's function.
Description of the filtered output and balanced input/output sockets (Combo, XLR).
Details on the Ground Lift switch and the main power socket with fuse.
Provides details on speaker type, impedance, recommended amplifier, and built-in amplifier.
Lists the frequency response range and sensitivity measurements.
Specifies maximum SPL, woofer size, and material.
Details physical dimensions, weight, input connectors, and power cable.
Diagram showing stereo connection of two FBTMaxX9S units with satellites.
Diagram for stereo connection of one FBTMaxX9Sa with satellites.
Illustrates a stereo bi-amplification setup using two amplifiers for four speakers.
General| Power Handling | 1000W |
|---|---|
| Input Connectors | XLR |
| Net Weight | 35 kg |
| Configuration | Bass Reflex |
| Dimensions | 482 x 575 x 570mm |
| Enclosure Type | Bass-reflex |
