Fcar F5 Series - Screen Maintenance; Precautions

FCAR Auto Diagnostic Tool
7
the process of movement, please first loosen the screw after use and then unplug the main testing
cable to avoid that the diagnosis interface gets damaged.
3） After using the instrument, put the test cable, connectors and other accessories back to the
assembly case to avoid the missing.
1.3.3 Screen Maintenance
1） The screen surface will absorb dust due to the static electricity. It’s recommended to purchase the
LCD special cleaning cloth to clean the host screen and wipe it gently.
2） Do not wipe the dust with your fingers to avoid leaving fingerprints. Do not use chemical cleaners
to wipe the screen.
3） Please do not place the product near electric equipment that generates electromagnetic wave
interferences so as not to affect the display.
4） Please do not expose the screen in direct sunshine or ultraviolet lighting for long time so as not to
affect the life of the screen.
1.3.4 Precautions
1） It’s prohibited to frequently turn on/off the host, suddenly turn off the power supply or provide
unstable power supply, artificial abnormal power supply.
2） If it’s not in use, please unplug the power supply connector to protect the electrical components
from aging when electrifying for long time.
3） Please don’t unplug the SD card when it’s switched on so as not to damage the data or burn the
card.
4） Please don’t use it in the volatile acid and alkali chemical air environment so as not to corrode the
host hardware.
5） Please do not use chemical reagents such as lacquer thinner, engine cleansing agent, gasoline etc.
to wipe the host.
6） No object can be placed on the display to avoid the touch screen break or internal component
damages due to heavy loads.
7） Please regularly run the diagnostic computer host to protect it from damp when it is not in use for
extended periods.