Point Inspection before every use
Squeeze right hand brake and push the vehicle to see
whether it rolls easily. If it does, then the brake must
be tightened. Tighten the bolt until the vehicle will no
longer move with the brakes applied.
Listen for any noticeable grinding or squealing from
the tires while the brake is applied. If so, contact the
supplier. Set the bike upon the middle stand, and turn
the rear wheel by hand. If it does not turn freely,
adjust rear disc to avoid electric consumption.
Check fluid gauge on the left handlebar to ensure that
the brake fluid is above the indicated level. If not, top
it off with a good brand of brake fluid.
Turn Throttle counter clockwise then release; the
Throttle should spring back to stop position. If not,
contact your supplier.
Check the tire pressure is 36 PSI 确认胎压是 36PSI
Check the usage and condition
Check the power level by looking at the gauge or with
a voltage meter Lithium battery is 84V-60V
Check to make sure your lights are working.
Check to make sure that all nuts and bolts are
tightened and secured.
Important Notes
1.Regularly perform a routine maintenance check. Doing so will help protect
yourself and your vehicle.
2.If any parts are damaged, whether normal or abnormal, please check with
the supplier before riding.
3
To Next Page