Assembly Instructions
Installing the mirrors
1. Mirrors can be easily fixed to the handle bars between the grips and the
brake handle.
2. Screw in the mirror clockwise. The mirror that goes on the left controller is
curved to the left and the mirror that goes on the right controller curves to
the right.
3. Secure mirror by tightening the bolt.
4. Clean and adjust both mirrors before you ride. Adjust each mirror so you
can see the lane behind you and as far as possible the lane next to you.
When the mirror is properly adjusted you can see the edge of your arm
and shoulder.
5. Insert axle and brake disc before installing front wheel
4
To Next Page