28
STEP 8:
Go inside the dome. Attach the canvas straps around the transparent front to the framework and pull them tight.
CONGRATULATIONS!
YOU ARE NOW DONE WITH THE INSTALLATION
OF THE OUTER MEMBRANE!
STEP 9:
At the bottom of the membrane you will find metal eyelets. Place one hook in each eyelet and another one
in each hole along the top edge of the metal bands. Once these are in place, weave the bungee cord between
them, which will secure the membrane from the inside of the dome.
NOTE:
Each bungee should fit in between the knots.
STEP 10:
Go outside and position the magnetic strips in the pockets along the bottom of the cover, around the perimeter
of the dome. These will snap onto the metal bands, securing the dome from the outside. Flip the lip of the dome
cover to cover the pockets with magnetic strips.
To Next Page