8
● Use your right thumb to push the right side of the throttle control lever.
● Use your left hand fingers to pull back on the left side of the throttle control lever.
Release the lever and allow your scooter to come to a complete stop before pushing the
other side of the lever to move in reverse. When the scooter is moving in reverse, the
reverse beeper will sound. When the throttle is completely released, it automatically
returns to the center “stop” position and engages your scooter’s brakes.
Speed Adjustment Dial(17)
This dial allows you to preselect and limit your Scooter’s top speed in the range of 0mph –
5mph:
● The image of the snail represents the slowest speed setting.
● The image of the hare represents the fastest speed setting.
5.0 OPERATING YOUR SCOOTER
5.1 STARTING
1. Make sure you are seated safely and properly on your scooter.
2. Turn the speed adjustment dial fully counterclockwise to the slowest setting.
3. Insert the key into the key switch.
4. Turn the key clockwise to the ‘’On’’ position.
5. Place your hands on the hand grips:
i. Pull-on the left hand grip to steer your scooter to the left.
ii. Pull-on the right hand grip to steer your scooter to the right.
6. Move the tiller to the center position to drive straight ahead.
7. Slowly engage the throttle control lever to gently accelerate your scooter forward by
either:
i. Use your left thumb to push the left side of the throttle control lever
forward.
ii. Use your right hand fingers to pull back on the right side of the throttle
control lever.
To Next Page
Loading...