FEC AFC1500 - Page 7

Never touch rotating devices or any part of the nutrunner
Make sure that no part of your body gets near any moving part of the tool.
The spindle may rotate unexpectedly, resulting in injury.
Do not remove the motors
The tool output
spindle may rotate and cause injury.
Do not repair, disassemble, or modify the equipment
Failure to observe
this instruction may cause
Never operate the equipment
flammable gases.
Failure to observe
Keep fingers away from the
the equipment is turned OFF.
Wiring
operation and maintenance work shall be conducted by a
Failure to observe
this instruction may cause
Turn OFF the power when conducting wiri
Failure to observe
this instruction may cause
Never
damage the cables, apply excess
Never use damaged cables.
Failure to observe
this instruction may cause
Use type-
3 grounding of FG terminals.
Failure to observe
this instruction may cause
In case of an
abnormal odor, noise, or operation error
and turn OFF the power
source.
Install a Power shutdown
device
Failure to observe
this instruction may cause
Install an
emergency stop circuit
promptly.
Failure to observe
Keep away from the equipment
measures are conducted
a
Failure to observe
this instruction may cause
Safety Precautions
vii
Never touch rotating devices or any part of the nutrunner
tool while it is rotating.
Make sure that no part of your body gets near any moving part of the tool.
The spindle may rotate unexpectedly, resulting in injury.
and gear cases of tools while power is applied.
spindle may rotate and cause injury.
Do not repair, disassemble, or modify the equipment
individual components of the system.
this instruction may cause
injury, electric shock, fire and malfunction.
Never operate the equipment
where it is exposed to water, near a corrosive
Failure to observe
this instruction may cause fire.
Keep fingers away from the
connectors while the equipment is turned ON and
for a while after
the equipment is turned OFF.
Failure to observe this instruction may cause
electric shock
operation and maintenance work shall be conducted by a
qualified
professional.
this instruction may cause
electric shock and injury.
Turn OFF the power when conducting wiri
ng operation and maintenance.
this instruction may cause
electric shock and injury.
damage the cables, apply excess
stress to cables, or squeeze
the cables.
Never use damaged cables.
this instruction may cause
electric shock and fire.
3 grounding of FG terminals.
this instruction may cause
electric shock.
abnormal odor, noise, or operation error
occurrence,
stop operation
source.
Failure to observe this instruction may cause
injury and fire.
device
in order to ensure the safety of equipment.
this instruction may cause
injury.
emergency stop circuit
on the outside
of equipment in order to stop
Failure to observe
this instruction may cause injury.
Keep away from the equipment
during recovery from a temporary blackout
and
a
fter restarting the equipment. The equipment may
suddenly restart.
this instruction may cause
injury.
Warning
Safety Precautions
tool while it is rotating.
individual components of the system.
injury, electric shock, fire and malfunction.
atmosphere or
for a while after
electric shock
.
professional.
the cables.
stop operation
immediately
injury and fire.
of equipment in order to stop
operation
and
ensure safety
suddenly restart.