Transport the equipment properly according to its weight.
Failure to observe
this instruction may cause
The conditions when transporting the equipment by ship is as below.
◆
◆
Ambient humidity:
◆
◆
Rust prevention measure: Apply grease or oil on tools.
Failure to observe
this instruction may cause
Do not hold cables and output spindles when transpo
Failure to observe
this instruction may cause
Do not hold the
The indicator may come off and drop from the front panel.
Failure to observe
this instruction may cause
The equipment shall be stored under the following conditions.
◆
◆
Ambient humidity: 90% RH or lower
◆
Atmosphere:
Indoors (Avoid direct sunlig
No
corrosive gases or flammable gases
No oil mist, dust, water, salt, iron powder
◆
Avoid direct vibration or shocks
Failure to observe
this instruction may cause
viii
Transport the equipment properly according to its weight.
this instruction may cause
injury and malfunction.
The conditions when transporting the equipment by ship is as below.
-5°C
～
+55°C (Avoid freezing)
0% RH or lower
(Avoid moisture)
Rust prevention measure: Apply grease or oil on tools.
this instruction may cause
earth leakage and malfunction.
Do not hold cables and output spindles when transpo
rting the tools.
this instruction may cause
injury and malfunction.
front panel when transporting the AXIS Unit.
The indicator may come off and drop from the front panel.
this instruction may cause
injury and malfunction.
The equipment shall be stored under the following conditions.
-5°C
～
+55°C (Avoid freezing)
Ambient humidity: 90% RH or lower
(Avoid moisture)
Indoors (Avoid direct sunlig
ht)
corrosive gases or flammable gases
No oil mist, dust, water, salt, iron powder
Avoid direct vibration or shocks
this instruction may cause
earth leakage and malfunction.
To Next Page
Loading...
