FEC AFC1500 - Page 9

Install all tools firmly
where they can bear the maximum torque
Failure to observe
this instruction may cause
Install the AXIS Unit firmly
Failure to observe
this instruction may cause
Use the specified tool for the AXIS
Failure to observe
this instruction may cause
The AXIS (SAN) U
nit shall
Failure to observe
this instruction may cause
Do not block the
ventilation hole
Avoid any foreign body
from entering
Failure to observe
this instruction may cause
The power source shall be provided with safety measures
protectors.
Failure to observe
Do not use tools or AXIS
(S
Failure to observe
this instruction may cause
Do not
get on the top of equipment or do not place heavy
Failure to observe
this instruction may cause
Do not subject the
equipment
Failure to observe
this instruction may cause
Apply proper wiring size
and firmly
Failure to observe
this instruction may cause
Operate the equipment within the specified power supply voltage
Failure to observe
this instruction may cause
Take sufficient
measures to
conditions:
◆ Location where
electrical
◆ Location
where the equipment is subjected to
◆ Location near a
high
Failure to observe
this instruction may cause
Safety Precautions
Installation / Wiring
ix
where they can bear the maximum torque
during operation.
this instruction may cause
injury and malfunction.
inside the control panel using the specified screws.
this instruction may cause
malfunction.
Use the specified tool for the AXIS
(SAN) Unit.
this instruction may cause
fire and malfunction.
nit shall
maintain the specified distance from other devices.
this instruction may cause
fire and malfunction.
ventilation hole
of the AXIS (SAN) Unit.
from entering
inside the equipment.
this instruction may cause
fire and malfunction.
The power source shall be provided with safety measures
such as breakers
Failure to observe
this instruction may cause fire and malfunction.
(S
AN) Units that are damaged or missing parts.
this instruction may cause
fire, injury and malfunction.
get on the top of equipment or do not place heavy
objects
on the top of equipment.
this instruction may cause
injury and malfunction.
equipment
to excess shock and impact.
this instruction may cause
malfunction.
and firmly
tighten all termination points.
this instruction may cause
injury, false operation
and malfunction.
Operate the equipment within the specified power supply voltage
.
this instruction may cause
injury, electric shock, fire and malfunction.
measures to
shield the equipment w
hen operating the in the following
electrical
noise is generated
where the equipment is subjected to
a strong electric field or
magnetic field
high
power wire.
this instruction may cause
injury, false operation, and malfunction.
Caution
Safety Precautions
Installation / Wiring
during operation.
such as breakers
and circuit
on the top of equipment.
and malfunction.
injury, electric shock, fire and malfunction.
hen operating the in the following
magnetic field
injury, false operation, and malfunction.