FEC AFC3000 - Page 18

Ethernet-I/P Fieldbus Expansion Unit
PAGE 18
*3: With each of the output items for which there are set values of high and low limits, the results are
output in the order of: sign, result indication (including the decimal point), judgment code, and 1st
Reject (failure) item. Also with items besides the differential angle and rates 1 to 3, ① is not output,
and for the peak current, ③ is not output.
‘
‘‘
‘-
--
- 123.5
123.5123.5
123.5L
LL
L X
XX
X’
’’
’
① ②③
① Sign ② Judgment Code
Indication Details Indication Details
Space (20H) + value Space (20H)
Within high and low limit, no warning (peak
current)
- (2DH) - value H (48H)
Outside high limit, high limit warning (peak
current)
L (4CH)
Outside low limit, low limit warning (peak
current)
③ 1st Reject Item
Indication Details
X (58H) 1st Reject item
Space (20H) Reject item besides the 1st
Reject
*4: With each of “Spindle Cycle Count (4 digits)” and “Tool Cycle Count (4 digits),” numerical values of
the millions, hundred thousands, ten thousands, and thousands places are output as 4-digit BCD
data.
When the cycle count reaches 9,999,999 (99 99BCD), the next cycle will be 10,000,000, output as
(00 00BCD).