Fedders C18ABD1VF User Manual

Split System Air Conditioner
1
1
⁄2 thru 5 Tons
208/230 Volt, 1-Phase, 60 Hz
Performance:
Efficiency rating of 13 SEER and 14 SEER
Cooling capacities from 1
1
⁄2 to 5 tons
Refrigerant Circuit:
Factory installed liquid line filter drier
Long life copper tubes, aluminum fins
State-of-the-art compressors
Large, wrap-around coil surface
Quality Built:
Galvaniz
ed steel exterior cabinet with
1,000-hour salt spray, powder-coated finish
Powder-coated fan guard
Full louvered panel to protect coil
Formed base with 2
1
⁄2" ground clearance
Limit
ed 5-year warranty on parts
Easy To Install:
Factory-charged with R-22 refrigerant
Only three screws to access electrical controls
Easy access to service valves
Rated in Accordance with ARI Standard 210.
Certification Applies Only When Used with
Proper Components as Listed with ARI.
Additional rating information can be found
at www.aridirectory.org
Residential & Light Commercial HVAC
Model
Siz
e
Nominal
Min. Cir
cuit
Max. Fuse or
Operating Dimensions Min. Mounting Ship / Operating
Number
(tons)
BTUH
Ampacity
Br
ea
k
er H x W x D (inches) Pad Size (inches) Weight (lbs)
C18ABD1VF 1
1
⁄2 18,000 9.1 15 26
1
⁄2 X 21
1
⁄2 X 21
1
⁄2 24 x 24 144 / 138
C24ABD1VF
2
24,000
11.5 15 26
1
⁄2 X 21
1
⁄2 X 21
1
⁄2 24 x 24
142 / 136
C30ABD1VF
2
1
⁄2 30,000
14.3
20
32
1
⁄2 X 21
1
⁄2 X 21
1
⁄2 24 x 24
169 / 163
C36ACD1VF 3 36,000 18.7 30 32
1
⁄2 X 29
1
⁄2 X 29
1
⁄2 32 x 32 189 / 180
C42ACD1VF
3
1
⁄2 42,000
20.3
35 32
1
⁄2 X 29
1
⁄2 X 29
1
⁄2 32 x 32
213 / 204
C48ACD1VF
4
48,000
23.1
40
32
1
⁄2 X 29
1
⁄2 X 29
1
⁄2 32 x 32
217 / 208
C60ACD1VF 5 60,000 30.1 50 39 X 29
1
⁄2 X 29
1
⁄2 32 x 32 230 / 220

Fedders C18ABD1VF Specifications

General

Brand	Fedders
Model	C18ABD1VF
Category	Air Conditioner
Language	English

Summary

Split System Air Conditioner Features

Performance

Details on efficiency ratings (SEER/SEER) and cooling capacities from 1½ to 5 tons.

Refrigerant Circuit

Information on factory-installed filter drier, copper tubes, aluminum fins, compressors, and coil surface.

Quality Built

Describes the galvanized steel cabinet, powder-coated finish, fan guard, louvered panel, base clearance, and warranty.

Easy To Install

Highlights factory-charged R-22 refrigerant, simple electrical access, and accessible service valves.

Product Specifications Overview

Physical and Performance Data

Details on model size, nominal capacity, fan motor type, diameter, blades, RPM, CFM, and outdoor coil type.

Electrical Data and Refrigerant Connections

Specifications for minimum circuit ampacity, max fuse/breaker, compressor ratings, fan FLA, and refrigerant line sizes.

ARI Certified Performance Ratings

Combination Ratings

Presents SEER and EER ratings for various outdoor and indoor unit combinations.

Rating Conditions and Notes

Explains testing conditions, required components (TDR), and definitions for SEER, EER, TDR, and TXV.

Extended Cooling Capacities and Line Sets

Line Set Length and Size Recommendations

Guidance on selecting suction and liquid line sizes based on BTUH and length.

Condenser Entering Air Temperature Capacities

Cooling capacity (Total and Sensible) data at various outdoor air temperatures.

Unit Dimensions and Shipping

Dimensional Drawings and Specifications

Illustrations and measurements for all dimensions (A-F) and minimum mounting pad size.

Shipping Dimensions

Provides the H x W x D measurements for shipping the units.

Model Number Identification

Model Number Breakdown

Explains the meaning of each character in the model number for product type, capacity, series, and variations.

Component Designations

Defines electrical designation (voltage/phase) and fitting type (sweat).