FedEx Ship Manager - Page 53

Chapter One: Setting Up FSMS
FedEx Ship Manager
®
Server User Guide, Version 7.6 51
4. Select the report folder and click Open. You are returned to the Printer Settings window, and the
directory you chose is displayed in the Directory field.
Changing Paper Size and Number of Copies:
If you choose a report (for example, International Commercial Invoice), and the Paper Size and/or
Number of Copies field is displayed, you may change designations for these fields as follows:
• Paper Size is allowed for International reports only. You may select either 8-1/2” x 11” or A4 from the
pull-down list.
• Number of Copies is provided for select reports in the Reports list. This field is displayed by FSMS
when a report is selected that allows a variable number of printed copies to be chosen. For example,
if you select “Commercial Invoice” from the International reports list, FSMS allows you to choose up
to 9 copies of this document.
To Save Your Entries on the Printer Settings Tab:
1. Click Copy To All Reports to copy the printer or report path for a selected report to all reports within
the active meter. This will not copy any report information to any other meter. To copy report
information to other meters, use the Copy To All Meters button.
2. Click Copy To All Meters if you want to configure your printer settings for all of the meters configured
on your server. If you are configuring different printers for each meter (if you have more than one
meter assigned for your shipping operation), you must repeat the install procedures.
3. Click OK at the bottom of the Printer Settings window to save your selections.