5. How to operate
1. Unfolding
1. Push the safety lock device on the upper part of handle to the arrow direction as in the picture ① to
indicate unlock signal.
2. With the folding button pulled to the arrow direction as shown in the picture ②.
3. lift the handle to the arrow direction as shown in the picture ③.
4. When unfolding the stroller, pull the handle fully and unfold until there is a clicking sound.
5. Make sure the safety line (in green color) is shown after unfolding. Safety line should be seen before
using.
6. When using the stroller, push the safety lock device to the opposite direction of the arrow (picture ①)
so that the lock indicator appears.
Warning
Do not press the folding button while driving to avoid safety accident caused by releasing the lock device.
Using the stroller without showing the safety line (green) may cause accident. Therefore, make sure that the
stroller is correctly unfolded before using.
To Next Page
Loading...