OPERATION INSTRUCTIONS
Note:
Do not remove the float in the water tank. Otherwise, the sensor maybe
unable to identify the water level in the tank properly, thus causing water
leakage.
If the water tank is dirty, please use cold or warm water to clean it. Do not
use any detergents, steel wools, chemically-treated dust clothes, gasoline,
benzene, thinners or other solvents. Otherwise, it may damage the water
tank and cause it to leak.
When placing the water bucket back, please use your hands to gently put it
back to its original place. If the water tank is not placed properly, the
sensors preventing water overflow may not operate as expected.
To Next Page
Loading...