Feider Machines FTDTR4240 - OPERATION; Engine Starting Procedures

ORIGINAL INSTRUCTIONS
16
The blade can cause serious injury. Stop the engine before
adjusting cutting height.
5. OPERATION
FOR MODEL FTDTR4240
a) Starting the engine
- Place the mower in a clear, level area.
- Push the primer bulb several times (at least 8 times).
- Pull back on the operator control lever and hold it against the handle (the
clutch lever must not be activated)
-
With the starter handle in its support, take the starter handle with your right hand and
pull slowly as far as to have a resistance, and then pull energetically on the starter
handle with starter rope through the support.
FOR MODEL FTDTR4240ES
a) Starting the engine
Manually
- Place the mower in a clear, level area.
- Push the primer bulb several times (at least 8 times).
- Pull back on the operator control lever and hold it against the handle (the
clutch lever must not be activated)
-
With the starter handle in its support, take the starter handle with your right hand and
pull slowly as far as to have a resistance, and then pull energetically on the starter
handle with starter rope through the support.
OPERATOR CONTROL
LEVER