Feider Machines FTDTR4240 - MAINTENANCE SCHEDULE AND TROUBLESHOOTING; Maintenance Schedule Overview; Troubleshooting Engine Start Issues

ORIGINAL INSTRUCTIONS
24
Maintenance Schedule
REGULAR SERVICE
PERIOD(4)
Before
Each
Use
First
Month
or
5 Hrs
Every 3
Months
or
25 Hrs
Every 6
Months
or
50 Hrs
Every
Year
or
100 Hrs
Every
Two
Years
or 250
Hrs
ITEM
Perform at every indicated
month or operating hour
interval, whichever comes
first.
Engine oil
Check
O
Replace
O
O(2)
Air cleaner
Check
O
Replace
O
Spark plug
Check-adjust
O
Replace
O
Flywheel
brake pad
(A types)
Check
O
Fuel tank
and filter
Clean
O
Fuel tube
Check
Every 2 years (Replace if necessary)
Valve
clearance
Check-adjust
O
Combustion
chamber
Clean
After every 200 hours
Trouble Shooting
ENGINE WILL NOT START
Possible Cause
Correction
1. Check fuel.
Out of fuel.
Refuel
Bad fuel; engine stored without
treating or draining gasoline, of
refueled with bad gasoline
Drain the fuel tank and
carburetor. Refuel with
fresh gasoline.
2. Remove and inspect spark
plug.
Spark plug faulty, fouled, or
improperly gapped.
Replace the spark plug.
Spark plug wet with fuel
(flooded engine).
Dry and reinstall spark plug.
3. Take engine to an authorized
our servicing dealer, or refer to
shop manual.
Fuel filter clogged, carburetor
malfunction, ignition
malfunction, valves stuck, etc.
Replace or repair faulty
components as necessary.
4. Push the prime button
In cold condition
Push the prime button.