ORIGINAL INSTRUCTIONS
Residual risks
Even if you use this product in compliance with all safety requirements, the potential risks of
injury and damage remain. The following hazards may arise in the structure and design of this
product:
There are risks of injury and property damage due to attachments or broken the sudden
impact of hidden objects when using cutting.
There are risks of injuries and accidents caused by flying objects.
Prolonged use of this product exposes the operator to vibrations and can produce so-called
"white finger" disease. To reduce the risk, wear gloves and keep your hands warm.
If any of the symptoms of "white finger syndrome" occur, seek immediate medical attention.
Symptoms of "white finger" include numbness, loss of sensitivity, tingling, pain, loss of strength,
colour changes or skin condition. These symptoms usually appear on the fingers, hands or
wrists. Risk increases at low temperatures.
A long exposition to noise can affect the health of the operator. A hearing protection must be
always used when operating the tool. The operation of the tool must be limited and some rest
must be taken between two sessions (e.g. 10min of operation and 20min of rest).
Symbols
Watch out for projections! Keep viewers away from
work area
Danger! Keep your hands and feet away from the
cutting element
Warning – Exhaust gas. Do not be exposed to
exhausted gas and do not use the tool in a confined
place
To Next Page
Loading...
