FEIERDUN FOR01 - Step 4: Connect Front Tube and Fixed Shafts

10
11
45
45
49
49
14
95
95
103
103
103
103
98
98
107
107
8
8
STEP 4 ˖
1. Attach the Upper Front Connection Tube (14) and two Connect Plates (140mm) (49) to the
two Upper Cross Beams (8), using four M10X70mm Carriage Bolts (98), four M10
Washers (103) and four M10 Nylon Nuts (107).
2. Insert the twenty Fixed Shafts (45) into Weight Support Tube (Right & Left) (10&11), using
twenty M10X15mm Bolts (95) and twenty M10 Washers (103).
-7-
ASSEMBLY INSTRUCTIONS