Need help?Do you have a question about the Feig Electronic cVEND plug and is the answer not in the manual?
General| Operating Frequency | 13.56 MHz |
|---|---|
| Operating Voltage | 5 V DC |
| Operating Temperature | -25°C to +70°C |
| Storage Temperature | -40°C to +85°C |
| Communication Interface | USB, RS-232 |
| Certifications | CE, FCC, IC |
| Power Supply | USB or external power supply |
| Weight | Approx. 150 g |
| Interface | USB, RS-232 |
Covers essential safety guidelines for device usage, operation, and maintenance by qualified personnel.
Details on the device's security circuit, prohibiting disassembly and outlining reactivation procedures.
Provides precise measurements for flush integration, including opening diameter and front plate thickness.
Details the RJ45 Ethernet port, 10/100 Base-T capabilities, and recommended CAT 5 cables for reliable operation.
Explains the USB-Device interface for host connection, noting it's self-powered and not USB-powered.
Describes the RS232 interface on V.24 level, including pin assignments and wake-up functionality.
Covers the RS232 interface on LVTTL 3.3V level with hardware handshake and cable length recommendations.
Specifies 5 V DC regulated power supply requirements, filtering, and polarity considerations.
Details how the bidirectional Wakeup I/O is used for standby mode signaling and host-initiated wake-up.
Details the connector for an external custom specific RGB Display, with technical details available upon request.
Describes the connector for SAM cards and SD memory cards via an optional extension board.
Details the connector for custom electronics, offering signals for smart cards, SD cards, I/Os, and communication protocols.
Lists various standards and certifications including EN, FCC, IC, RoHS, IP ratings, and EMVCo contactless levels.
Confirms compliance with essential requirements of the R&TTE Directive 1999/5/EC for radio equipment.
Details FCC Part 15 and IC RSS-210 compliance, including conditions and installation notices.
To Next Page
