1
6
9-77-25 TURBO III VAC ACCESSORIESASSEMBLY INSTRUCTIONS
To attach the wheels, press the wheel posts into
the four holes provided.
b) Connect the handle 4 with the hose end 3 by
pressing in. The handle is provided with a suction
force reducing device. Turn in the dirrection of
the arrow. In order to get full suction pressure,
keep the regulating device closed.
c) Tube extension pieces 5 and accessories can
be connected by pressure. For disassembling,
slightly turn both parts and draw apart.
1
a)
Connect the vacuum end of hose 2 to the
receptacle Q by pressing in. In order to remove
the hose, slightly turn and pull the hose out
simultaneously.
Item Part Number Description
1 921001AK13 Extension tube (order 2)
2 921085AK13 Handle
3 921081CD13 Floor nozzle
4 921003AK13 Upholstery nozzle
5 921002AK13 Brush
6 921004AK13 Crevice tool
7 90204200 Anti-foam filter
8 TII1MCRN 1Micron filter
TIIHEPA Hepa filter 0.3 microns
9 TII3002 Flange filter
10 TII3001 Turn screw-filter
11 913064AGA6 Cloth filter
12 913048K01 Paper dust bag- 3 pack
13 530300AA41 Waste pipe hose
14 921086AA13 Y connector with cap
15 921087AK13 Y cap
16 3916054A089 Hose cradle
17 526300AA13 Basket and strap
Kits:
FBK-3 TIIMCRN 1 Micron pleated filter
consists 913048A01 Paper dust bag
of 1 each TII3002 Filter flange
TII3001 Flange turn screw
DW3 921001AK13 Extension tube (2)
consists 921004AK13 Crevice nozzle
of 1 each 921085AK13 Handle
902042000 Anti-foam filter
921081CD13 Upholstery nozzle
921081CD13 Floor nozzle
921002AK13 Brush
To Next Page
Loading...
