Sahre / MVK 01.07
All rights reserved by FEIN, in particular as these apply to trademarks.
FEIN retains all powers of disposition such as copying and right of transfer.
FRT: FMM 250 / FMM 250 Q
3.1.2. Electronics
• The electronics cannot be tested without load (motor), the control
circuit has to be closed.
• The function of the electronics is released when the speed values
correspond to the test data.
Attention!
At supply voltage, the machine may only be operated with correctly loaded
electronics, otherwise the control circuit is interrupted and the speed
increases to prohibited levels.
3.1. Function test
To Next Page
Loading...
