To Next PageTo Next Page
Need help?Do you have a question about the Fein KBM52U and is the answer not in the manual?
Defines DANGER, WARNING, and CAUTION levels for hazards.
Lists common units of measure used in the manual.
Container for storing coolant.
For moving the drill motor up and down.
Indicates drill motor movement in 1 mm increments.
Secures the core drill to a magnetizable base.
For securing the core drill with the clamping strap.
Prevents accidental contact with rotating parts.
Sets gear level for slow or fast speed.
Fastens the coolant container.
For starting and stopping the motor.
Reduces motor speed.
Switches the magnet ON and OFF.
Sets the quantity of coolant.
Sets the variable stroke range of the motor.
For clamping the tool.
For clamping twist drill and core drill bits.
Adapter for Quick IN tool holder.
Information on using spiral bits.
Lists included accessories like adapters, chucks, pins, etc.
Ensure the magnetic foot surface is level, clean, and rust-free.
Use special fixation devices for non-magnetizable surfaces.
Reinforce workpieces less than 12mm thick for magnetic holding.
Instructions for mounting the protective guard.
How to attach and fill the coolant container.
How to adjust the stroke range lever.
Steps for inserting core bits, adapters, and twist drills.
Selecting gear level and switching motor.
How to engage the magnet and start/stop the motor.
Weekly cleaning steps for air vents and interior.
Details on model type, power input, and output.
Clockwise and anti-clockwise rotation speeds.
Weight, insulation class, drilling capacities.
Measured A-weighted sound power and pressure levels.
Rated acceleration and inaccuracy for vibration.
General| Brand | Fein |
|---|---|
| Model | KBM52U |
| Category | Power Tool |
| Language | English |
