Need help?Do you have a question about the Fein MM 300 Plus and is the answer not in the manual?
Read all safety warnings and instructions. Failure to follow may result in injury.
Keep work area clean, avoid explosive atmospheres, keep bystanders away.
Ensure correct plugs, avoid modification, protect from rain/wet conditions, avoid earthed surfaces.
Stay alert, use PPE, prevent unintentional starting.
Do not force tool, check switch, disconnect power, store safely, maintain tools, keep cutting tools sharp.
Hold by insulated surfaces to avoid shock from hidden wiring or own cord.
Avoid inhaling dusts that are hazardous to health or can combust/explode.
Use appropriate dust extraction, PPE (P2 mask), and ensure good ventilation.
Vibrations can cause health impairments; actual emission may differ from declared value.
Estimate exposure level, consider tool off-times, use safety measures like tool maintenance and warm hands.
Use adequate length and cross-section to prevent voltage drop, power loss, and overheating.
Hand-guided oscillator for sanding, sawing, scraping, polishing, cutting, and separating.
Explains symbols like prohibition, warning, attention, eye protection, hearing protection, dust mask, gloves, on/off.
General| Brand | Fein |
|---|---|
| Model | MM 300 Plus |
| Category | Power Tool |
| Language | English |
To Next Page
