Guilin Feiyu Technology Incorporated Company
Guilin Feiyu Technology Incorporated Company www.feiyu-tech.com service@feiyu-tech.com
-1-
WG2 Gimbal Firmware Upgrade Manual
● Please do not operate any other function button except the ones indicated
by the instructions during upgrade.
● The firmware upgrade software is compatible with Windows operation
system provisionally,including Window XP / 7 / 8 / 8.1 / 10.
● If you want to upgrade it in Mac, Please kindly download the upgrade
software and USB driver for Mac from our official website.
● If you want to get the current version of the gimbal, please do the operations
step 1~7.
1. Download the USB driver from FeiyuTech official website
http://www.feyu-tech.com andinstallit.Thendownloadtheupgrade
software and the firmware for WG2.
2. Please refer the following connection diagram, connect the USB cable
with USB port of the computer and the gimbal. please make sure the
gimbal is powered off until step 7.
Attention
Steps
To Next Page
Need help?
General
