Need help?Do you have a question about the FeiYu Tech SCORP Mini and is the answer not in the manual?
Charge the gimbal battery before first use via USB 2.0 to Type-C cable, supporting up to 18W.
Unlock all three axes and adjust the gimbal to the balancing position, then relock the axes.
Attach the quick release plate to the camera by tightening the screw, or use the mount adapter.
Install the lens holder on the quick release plate under the lens for long or heavy lenses.
Install the camera plate into the gimbal slot, lock the safety lock, and adjust position using the slider lock.
Balance the vertical tilt by adjusting the slide arm lock knob and moving the slide arm.
Balance the roll axis by unlocking the roll lock and adjusting the cross arm lock knob.
Balance the pan axis by unlocking the pan lock and adjusting the vertical arm lock knob.
Long press the power button to turn the gimbal on or off. Ensure axes are balanced and unlocked before powering on.
Single tap the screen to lock or unlock the touch screen interface.
Double tap the power button to enter sleep mode; single tap to wake up.
Introduction to various follow modes like PF, PTF, FPV, and Lock for controlling gimbal movement.
Details on Auto rotation, Portrait mode, and Selfie mode for creative shooting scenarios.
Instructions on connecting the gimbal to the Feiyu SCORP app via Bluetooth.
Instructions on connecting the gimbal to the Feiyu ON app via Bluetooth.
Details of the Feiyu SCORP App interface, including gimbal control access, scenarios, and settings.
Details of the Feiyu ON App interface for smartphones, including album access and gimbal information.
Detailed explanation of how to use the gimbal's physical buttons for various functions.
Use the joystick to control the movement of the tilt and pan axes.
Control focus, start/stop recording, and take photos using the shutter button.
Switch control objects and operate the multifunction knob for axes, focus, and parameters.
Guide to interacting with the gimbal's touch screen interface for various controls.
Set motor power manually or use auto-tune for each axis based on the camera load.
Select and adjust gimbal follow speed and switch between follow modes (PF, PTF, FPV, Lock, FFW).
Configure and use shooting modes like Timelapse, Auto Rotation, Panorama, Portrait, and Selfie.
Record video with up to 10 waypoints for automated camera movement.
Details of camera control port and extension port for connecting accessories.
General| Model | SCORP Mini |
|---|---|
| Category | Camera Accessories |
| Material | Aluminum Alloy |
| Foldable Design | Yes |
| Waterproof | No |
| Panning Angle | 360° |
| Type | Handheld Gimbal |
| Compatible Devices | Smartphones |
| Control Interface | Joystick, Buttons |
| Connectivity | Bluetooth |
To Next Page
