FeiYu Tech SCORP Mini - Power ON;OFF and Wake Up; Powering the Gimbal On and Off

- 7 -
3
1
2
5. Power ON/ OFF& Wake up
5.1 Power ON/ OFF
(1) Before power on the gimbal, make sure you have balanced gimbal, and
unlocked all the three axes.
(2) If you haven't unlocked all the 3 axes, gimbal will enter sleep mode to
protect itself. Please single tap power button to wake up gimbal after
unlocked all the 3 axes.
! Please set motor power 󽗉rst after powering on gimbal for the 󽗉rst time or after
changing a new camera/lens.
(Please refer to chapter 8.3.1)
Long press the power button and release it when you hear the beep sound to power
on/ o󽗈.