Guilin Feiyu Technology Incorporated Company
Guilin Feiyu Technology Incorporated Company www.feiyu-tech.com service@feiyu-tech.com
-4-
8. Click on
OPEN FILE
button and choose the correct firmware for the
WG2
9. Click on
UPDATE
button to start upgrading, the process will display
on the software.
10. After all the blocks of the firmware are completely sent , please click on
Confirm button to finish the upgrade. Close the software then unplug
the USB cable. Long press the function button of the gimbal to power off.
All the upgrade is done.
To Next Page
Loading...
