1
2
3
12
7. Gimbal initialization
You can initialize your gimbal when:
1 camera is not level.
2 if not used for a long period of time.
3 in case of extreme temperature variations.
Adjusting steps:
Place the gimbal still on a desktop. The gimbal
will automatically initialize when it detects being
static. The blue light cycles three ashes and then
initialization ends,otherwise the initialization fails.
After the initialization is
successful, click the function
button to wake up.
Note: If the initialization is not successful for a long time,
long press the function button to turn o the gimbal,restart
it and then initialize.
Five tap function button, the
motors stop working after the
voice "drop" , the blue light is
always on.
To Next Page
Loading...
