What to do if my Felicitysolar Inverter shows overload timeout?
If your Felicitysolar Inverter shows an overload timeout, it means the connected load is too high. To fix this, you should reduce the load by turning off some of the connected equipment.
Important safety and operating instructions for future reference.
Lists and explains safety symbols used in the manual.
Provides information on the manual's content and usage.
Guidelines for reading and utilizing the manual effectively.
Describes the four primary operating modes based on PV, battery, and grid status.
Identifies and describes key components, ports, and indicators of the inverter.
Details the physical dimensions of the inverter unit.
Lists all items included in the inverter package.
Specifies the necessary tools for inverter installation.
Recommends suitable environmental conditions for inverter installation.
Instructions for installing the mounting bracket onto the wall.
Steps for lifting and securing the inverter onto the installed bracket.
Guidelines for connecting photovoltaic panels to the inverter.
Steps for preparing PV positive and negative power cables.
Steps for preparing and crimping battery cables and terminals.
Instructions for connecting the battery terminals to the inverter correctly.
Specifies the AC circuit breaker requirements for on-grid connection.
Procedure for connecting AC cables to the inverter and grid.
Explains the status indications of the smart meter's LEDs.
Details the pinout and function of the RS485 communication interface.
Identifies the DRMS interface port on the inverter.
Illustrates the steps for connecting the DRMS to the inverter.
Details how to connect the communication cable between the battery and inverter.
Explains the pin allocation for the battery communication port.
Steps to configure the inverter for lithium battery type via app or LCD.
Provides a comprehensive wiring diagram for the inverter system.
Overview of the inverter's control panel and display interface.
Explains the various icons shown on the inverter's LCD screen.
How to cycle through different information pages on the LCD display.
Shows examples of various data points displayed on the LCD.
Lists warning codes, their information, audible alarms, and troubleshooting steps.
Details fault codes, their information, and recommended troubleshooting actions.
Provides detailed technical specifications for IVGM4648 and IVGM5048 models.
Details the maximum, Euro, and MPPT efficiency ratings of the inverter.
Lists integrated protection features like over-current and GFCI.
Provides general specifications like operating temperature, altitude, and warranty.
Highlights important features such as WiFi support, battery type, and AC coupling.
General| Brand | Felicitysolar |
|---|---|
| Model | IVGM4648 |
| Category | Inverter |
| Language | English |
To Next Page
