Felix printers Tec 4 - Page 4

FELIXprinters Quick Start Guide for the FELIX Tec 4
Page 4
FELIX Tec 4
System Specications
• Printer dimensions (L, W, H) 410 x 450 x 520 mm
• Weight 9 kg
• Power requirements: 220 V
Capabilities
• Build volume Single mode (L, W, H) 205 x 255 x 225 mm
• Build volume Dual mode (L, W, H) 205 x 240 x 225 mm
• Layer height range 0.05 - 0.25 mm
• Bed temperature: max. 90 °C
Extruders
• Diameter nozzle: 0.35 mm (optional 0.5mm)
• Max temperature: 275 °C
Website
www.FELIXprinters.com
Print materials
• Open source 1.75 mm filaments
• Tolerance: ± 0.15 mm
• PLA, PVA, ABS-X, PETG, PolyFlex, Wood, Glass
Connectivity
• Stand-alone micro-SD card printing
• USB cable connection
• Optional WiFi - The Element by Printr (external)
Software
• Optimized for Simplify3D and Repetier-Host
Contact
info@FELIXprinters.com
Zeemanlaan 15, 3401 MV IJsselstein, The Netherlands
Specs