To Next PageTo Next PageWhat to do if Fellowes AeraMax Pro AM IV doesn't start?
If your Fellowes Air Cleaner fails to start, ensure it's properly connected to a power supply and that the power switch is turned on. Also, verify that you are using genuine AeraMax® PRO filters, aligning the filter detection area with the window in the filter frame. Make sure the front access panel is completely closed. For more details, review the “Re-Installing Filters” section.
What to do if Fellowes Air Cleaner fails to start?
If your Fellowes Air Cleaner fails to start, please check the following: * Ensure the unit is properly connected to a power supply. * Verify that you are using genuine AeraMax® PRO filters, as the unit is designed to function only with these filters. * Confirm that the filter detection area on the AeraMax® PRO replacement filter aligns with the window in the filter frame. * Make sure the front access panel is completely closed. * Check that the power switch is turned on.
Why does the HEPA light stay on after replacing filter in Fellowes Air Cleaner?
If the HEPA and/or Carbon Filter replacement indicator light remains lit after you have replaced the filter(s) in your Fellowes Air Cleaner, please repeat the filter light reset instruction.
Why does my Fellowes AeraMax Pro AM IV make a ticking sound?
A faint ticking sound from your Fellowes Air Cleaner indicates that the 'PlasmaTRUE™' bipolar ionizer is functioning correctly.
Why Fellowes AeraMax Pro AM IV Air Cleaner makes a faint ticking sound?
The faint ticking sound from your Fellowes Air Cleaner indicates that the “PlasmaTRUE™” bipolar ionizer is functioning correctly.
General| Product Type | Air Cleaner |
|---|---|
| Filtration Stages | 4 |
| Carbon Filter | Yes |
| PlasmaTrue Technology | Yes |
| CADR (Dust/Pollen/Smoke) | 300/300/300 |
| HEPA Filter | Yes |
| Filter Type | HEPA |
| Sensor Type | Particle Sensor |
| Warranty | 5-year limited warranty |
