Fellowes POWERSHRED 79Ci - Basic Shredding Operation; Step-by-Step Shredding Process; Advanced Product Features; Jam Proof System Operation

16
79Ci
16
79Ci
16
79Ci
2
Press ( ) ON to
activate (blue)
PAPER OR CD/CARD
BASIC SHREDDING OPERATION
1
4
Feed paper straight into
paper entry and release
or
3
Plug in and put
disconnect power
switch in ON (I) position
Continuous operation:
Up to 20-minute maximum
NOTE: Shredder runs briefly
after each pass to clear entry.
Continuous operation beyond
20-minutes will trigger
30-minute cool down period.
5
When finished
shredding set to
OFF (
)
6
3
ADVANCED PRODUCT FEATURES
To shred CDs or credit
cards rotate safety flap
into place
Hold card/CD at edge.
Feed into center of
entry and release
Energy Savings System
Optimal energy efficiency
100% of the time – in use
and out of use.
Jam Proof System
Elimimates paper jams
and powers through
tough jobs.
SafeSense
®
Technology
Stops shredding immediately
when hands touch the paper
opening.
SilentShred™ Technology
Shreds without noisy
disruptions.
16
79Ci
3
SAFESENSE
®
TECHNOLOGY OPERATION
Stops shredding immediately when hands touch the paper opening.
or
SET-UP AND TESTING
16
79Ci
16
79Ci
1
3
2
Turn the shredder ON
( ) to activate SafeSense
®
Touch test area and
look for the SafeSense
®
indicator to illuminate
SafeSense
®
is active and
working properly
If hand is held on SafeSense
®
area more than 3 seconds
shredder will shut off
1
16
79Ci
2
WHEN IN SLEEP MODE
In sleep mode
To get out of sleep mode
touch control panel
For more information about all of Fellowes Advanced Product Features go to www.fellowes.com
ENERGY SAVINGS SYSTEM
• Saves energy in four ways: energy-efficient electronics, jam prevention,
standby mode and sleep mode.
• Sleep Mode shuts down shredder after 2 minutes of inactivity.
Optimal energy efficiency 100% of
the time – in use and out of use.
16
79Ci
4
insert paper
JAM PROOF SYSTEM OPERATION*
*100% Jam Proof when used in accordance with user manual
Advanced Jam Prevention- Electronically
measures paper thickness to prevent paper jams:
Remove several sheets until
indicator is below red.
Continue 100% Jam
Proof Shredding
If a misfeed
occurs:
If
illuminates after paper has been
reversed, press reverse and remove paper.
Otherwise, regular shredding will resume.
1 2 3
Up to RED: Too many
sheets have been inserted.
Up to GREEN: More sheets
can be added.
Up to YELLOW: Productivity
is optimized.
All indicators light up and
shredder pauses for 3-6 seconds
Wait for flashing to stop after automatic correction
is complete. Regular shredding will resume.
Eliminates paper jams and powers through tough jobs.