How to maintain my Fellowes POWERSHRED 79Ci Paper Shredder to avoid noise and diminished capacity?
To prevent diminished sheet capacity, intrusive noise, and potential operational failure of your Fellowes Paper Shredder, oil it each time you empty the waste bin.
How to reduce intrusive noise when shredding with my Fellowes POWERSHRED 79Ci Paper Shredder?
To reduce intrusive noise when shredding with your Fellowes Paper Shredder, oil your shredder each time you empty your waste bin.
How to fix a noisy Fellowes Paper Shredder?
If your Fellowes Paper Shredder has diminished sheet capacity, makes intrusive noise, or stops, it is recommended to oil your shredder each time you empty the waste bin.
What to do if my Fellowes POWERSHRED 79Ci Paper Shredder overheats?
If your Fellowes Paper Shredder has exceeded its maximum operating temperature, it needs to cool down before you can use it again.
How to fix auto-start infrared sensors not working on Fellowes Paper Shredder?
If the auto-start infrared sensors on your Fellowes Paper Shredder are not functioning properly, it might be due to the sensors being blocked by paper dust. To resolve this, turn off and unplug the shredder. Then, locate the auto-start infrared sensor and use a cotton swab dipped in rubbing alcohol to gently clean the sensors.
What to do if Fellowes POWERSHRED 79Ci stops when hands are near paper entry?
If your Fellowes Paper Shredder stops shredding when your hands are too close to the paper entry, you must press the power button on the control panel to resume shredding.
What to do if my Fellowes POWERSHRED 79Ci Paper Shredder continues to run with no paper?
If your Fellowes Paper Shredder continues to run even when there is no paper, the sensors might be blocked by paper dust. To resolve this, dip a cotton swab in rubbing alcohol and gently clean the Auto-start infrared sensor.
What to do if my Fellowes POWERSHRED 79Ci Paper Shredder stops when my hands are near the paper entry?
If your Fellowes Paper Shredder stops because your hands are too close to the paper entry, press the power button on the control panel to resume shredding.
What to do if the waste bin of my Fellowes POWERSHRED 79Ci is full?
If the waste bin of your Fellowes Paper Shredder is full, you need to empty it. It is recommended to use a Fellowes waste bag 36052.
What to do if the SafeSense indicator illuminates and the Fellowes Paper Shredder stops?
If the SafeSense indicator lights up and your Fellowes Paper Shredder stops, simply press the power button on the control panel to continue shredding.
Essential warnings for safe operation, maintenance, and handling of the shredder.
Guidelines regarding power connection, flammable products, and fire hazards.
Explains how the Jam Proof system prevents jams and indicates paper thickness.
Details how SafeSense stops shredding when hands are detected near the opening.
General| Product color | Black |
|---|---|
| Working width | 230 mm |
| Shredding size | 4 x 38 mm |
| Shredding type | Particle-cut shredding |
| Shredding paper clips | Yes |
| Security level (paper) | 4 |
| Dimensions (WxDxH) | 390 x 275 x 500 mm |
To Next Page
