Need help?Do you have a question about the Fellowes Standard Horizon SRN-9x and is the answer not in the manual?
General| Brand | Fellowes |
|---|---|
| Model | Standard Horizon SRN-9x |
| Category | Industrial Equipment |
| Language | English |
Details the procedure for adjusting the drive hub position on the shaft for correct end float.
Describes the removal and re-assembly of the feed clutch assembly, including alignment notes.
Explains how to adjust the vacuum roller for correct paper alignment during feeding.
Explains tensioning twin grip and clutch drive belts by adjusting bearing housings.
Details tensioning motor drive belts by adjusting motor position.
Discusses the incremental control unit, wrap springs, and acceptable registration error tolerance.
Explains how to measure the over-travel of the clutch, a critical adjustment for numbering accuracy.
Details the procedure for adjusting over-travel on older clutch models.
Provides steps for adjusting over-travel on newer clutch models without removing it.
Explains how to measure the actuator clearance, critical for consistent clutch operation.
Details how to adjust the actuator clearance for proper solenoid operation.
Explains how to adjust the numbering position by sliding and rotating the stop collar.
Describes how to adjust the platen pressure by setting the adjuster cam and eccentric fixing screws.
Offers troubleshooting steps for issues where the suction machine fails to run, checking power and switches.
Provides troubleshooting guidance for when the suction machine fails to feed paper or feeds intermittently.
Details troubleshooting steps for when the suction machine feeds paper but does not number.
To Next Page