Femometer B001 - Page 6

support@femometerfamily.com
0908
Place the bottle with breast milk/milk on the anti-scald basket
and close the lid.
Place the bottle with breast milk/milk on the anti-scald basket and
close the lid.
Press the "On/Off" button and the "24H" button to start the 24-hour
Keep Warm function. Set the desired temperature between 37-60°C.
The screen will ash 3 times and then begin operation.
Press the "Switch" button and "Food" button to enter the Heating Food
function. Set the desired temperature between 37-80°C. The screen
will ash 3 times and then begin operation.
The screen will display the current temperature. It will take about 15-
30 minutes to reach the target temperature.
2
2
3
3
4
When the process is complete, the screen will ash "END" three
times and the appliance will enter standby mode. You can then open
the lid and remove the bottle.
24h
Fast 24HF ood Sterilize
5
24h
Fast 24HF oodS terilize
24h
Fast 24H Food Sterilize
Disconnect the appliance from the power source.
Pour out the water from the appliance.
Wipe the control panel and heating disc with a clean rag, then store
the appliance for future use.
6
2
4
h
F
a
s
t
2
4
H
F
o
o
d
S
t
e
r
i
l
i
z
e
7
8
Thawing/Reheating Food
Pour 80 ml of puried water into the appliance. Avoid using tap water
as it produces limescale quickly.
1
English
Place the Bottle:
Drain Water:
Clean and Store:
Add Water:
Place the Bottle:
Activate Heating:
Activate Warming:
Monitor Temperature:
Completion:
Unplug:
Fast 24 Sterilize
Food
Fast 24 Sterilize
Food
24h
Fast 24 Sterilize
Food
24h
24h