A PRODUCT OF:
FENDER MUSICAL INSTRUMENTS CORPORATION
CORONA, CA 91720 USA
TYPE: PR 370
PART NUMBER: 22-1301 (120V)
22-1331 (240V) Aust
22-1341 (230V)UK
22-1361 (230V) Eur
22-1371 (100V)
POWER REQUIREMENTS: 100V AC, 50/60 Hz 450W
120V AC, 60 Hz, 450W
230V AC, 50 Hz, 450W
240V AC, 50 Hz, 450W
POWER AMPLIFIER SECTION
POWER OUTPUT: 80W per channel, (160W R.M.S. Total)
into 8Ω @ <.07% T.H.D., both channels driven
SENSITIVITY : 1.51V (both channels)
PREAMP SECTION
INPUT IMPEDANCE: 10MΩ (Inst), 3.6kΩ (Mic), 36.4kΩ (Line/Inst)
TONE CONTROLS: Treble: +/-15dB @ 15kHz (Inst), +/-15dB @ 15kHz (Mic/Line/Inst)
Mid: +/-12dB @ 1kHz (Inst)
Bass: +/-12dB @ 100Hz (Inst), +/-12dB @ 50Hz (Mic/Line/Inst)
FEEDBACK NOTCH: -10dB from 80Hz to 700Hz (Instrument Channel)
-10dB from 720Hz to 7.2kHz (Mic/Line Channel)
STRING DYNAMICS: 0 to -15dB @ 6.3kHz (Instrument Channel)
PHANTOM VOLTAGE: +15V DC (Mic)
SPEAKER COMPLIMENT: One Fender Special Design 8” speaker (P/N 051016)
One Fender Special Design 10” speaker (P/N 029753)
Single Piezo Horn (P/N 049260)
DIMENSIONS: Height: 29.5 in 73 cm
Width: 17.5 in 44 cm
Depth: 13 in 33 cm
WEIGHT: 62 lbs 28.2 kg
Fender
®
, SFX
®
, Tone-Master
®
and Princeton
®
Chorus are
registered trademarks and Acoustasonic
™
is a trademark of the
Fender Musical Instruments Corporation.
The SFX Effect, patent pending, is manufactured under license
from Aspen Pittman and Drew Daniels of SFX Technology.
Product specifications are subject to change without notice.
ACOUSTASONIC SFX SPECIFICATIONS
P/N 052002 REV B
To Previous Page
Loading...
