Need help?Do you have a question about the Fender Acoustic Junior and is the answer not in the manual?
Combination jack for XLR and Hi-Z inputs. Phantom power available.
Adjusts overall volume for headphones and outputs.
Controls the intensity of selected effects.
Selects among various built-in effects.
LEDs show the currently active effect setting.
Shows amplifier status and battery level (Go model).
Bluetooth pairing button.
Controls Stereo Field Expansion effect extent.
Reverses channel polarity to reduce feedback.
Tone controls for bass, midrange, and treble.
Functions for recording, playback, and undoing looper passages.
Controls the amplifier's power on/off.
Connection for AC power cable.
1/8" stereo headphone output.
Connects external audio sources.
XLR outputs for connection to external sound systems.
Configures output mode for mono or stereo.
Lifts ground to help eliminate hum.
For audio recording and firmware updates.
Instructions for updating firmware.
Connection for the optional footswitch.
Indicate selected channel or looper mode.
Selects channel or looper modes; tuner indicator.
Controls FX Bypass and Looper Record/Dub.
Shows selected mode and function information.
Controls FX Select and Looper Play/Stop.
Controls tempo and tuner functions.
Indicates correct pitch in tuner mode.
Enables recording and overdubbing of audio passages.
Plays back recorded loops and allows overdubbing.
Reverts the last recorded or overdubbed passage.
Resets the looper and clears recorded audio.
Combination jack for XLR and Hi-Z inputs. Phantom power available.
Adjusts overall volume for headphones and outputs.
Controls the intensity of selected effects.
Selects among various built-in effects.
LEDs show the currently active effect setting.
Shows amplifier status and battery level (Go model).
Bluetooth pairing button.
Controls Stereo Field Expansion effect extent.
Reverses channel polarity to reduce feedback.
Tone controls for bass, midrange, and treble.
Functions for recording, playback, and undoing looper passages.
Controls the amplifier's power on/off.
Connection for AC power cable.
1/8" stereo headphone output.
Connects external audio sources.
XLR outputs for connection to external sound systems.
Configures output mode for mono or stereo.
Lifts ground to help eliminate hum.
For audio recording and firmware updates.
Instructions for updating firmware.
Connection for the optional footswitch.
Indicate selected channel or looper mode.
Selects channel or looper modes; tuner indicator.
Controls FX Bypass and Looper Record/Dub.
Shows selected mode and function information.
Controls FX Select and Looper Play/Stop.
Controls tempo and tuner functions.
Indicates correct pitch in tuner mode.
Enables recording and overdubbing of audio passages.
Plays back recorded loops and allows overdubbing.
Reverts the last recorded or overdubbed passage.
Resets the looper and clears recorded audio.
General| Channels | 2 |
|---|---|
| Bluetooth | Yes |
| Construction Material | Wood |
| Effects | Reverb, Delay, Chorus, Vibratone |
| Outputs | 1 x XLR (line out) |
| Weight | 15 lbs (6.8 kg) |
| Speakers | 1 x 8" full-range |
| Footswitch I/O | 1 x 1/4" (footswitch) |
| EQ | 3-band EQ |
| Headphone Output | Yes |
| Auxiliary Input | 1 x 1/8" (aux) |
To Next Page