Need help?Do you have a question about the Fender ACOUSTIC 100 and is the answer not in the manual?
Combination jack accepting XLR and high-impedance 1/4" inputs for instruments or microphones.
Adjusts channel one volume.
Helps reduce feedback by reversing speaker polarity; dual press initiates Bluetooth pairing.
Adjusts channel one bass, mid, and treble tone.
Determines effect intensity and selects among various studio-quality stereo effects.
1/8" stereo input for external audio players.
Illuminates when the Acoustic 100/200 is powered on.
1/8" stereo headphone output that automatically mutes speaker output.
LEDs illuminate to show the effects setting in use for each channel.
Turns the amplifier on/off and connects the IEC power cord.
For audio recording to a computer.
Input jack for connecting compatible MS4 and MGT-4 footswitches.
XLR output jacks for connection to external sound reinforcement or recording devices.
Cycles through manual mode and effects presets; saves settings.
Controls channel one effects on/off and activates channel one tuner.
Indicates correct pitch in tuning mode.
Shows tuning mode and effects preset information.
Controls channel two effects on/off and activates channel two tuner.
Controls time-based effect tempos for echo, delay, and chorus effects.
Combination jack accepting XLR and high-impedance 1/4" inputs for instruments or microphones.
Adjusts channel one volume.
Helps reduce feedback by reversing speaker polarity; dual press initiates Bluetooth pairing.
Adjusts channel one bass, mid, and treble tone.
Determines effect intensity and selects among various studio-quality stereo effects.
1/8" stereo input for external audio players.
Illuminates when the Acoustic 100/200 is powered on.
1/8" stereo headphone output that automatically mutes speaker output.
LEDs illuminate to show the effects setting in use for each channel.
Turns the amplifier on/off and connects the IEC power cord.
For audio recording to a computer.
Input jack for connecting compatible MS4 and MGT-4 footswitches.
XLR output jacks for connection to external sound reinforcement or recording devices.
Cycles through manual mode and effects presets; saves settings.
Controls channel one effects on/off and activates channel one tuner.
Indicates correct pitch in tuning mode.
Shows tuning mode and effects preset information.
Controls channel two effects on/off and activates channel two tuner.
Controls time-based effect tempos for echo, delay, and chorus effects.
General| Power Output | 100W |
|---|---|
| Channels | 2 |
| Bluetooth | Yes |
| Speaker | 8" Full-Range Whizzer Cone |
| Inputs | 2 x 1/4" |
| Effects | Reverb, Chorus |
| USB | 1 USB Type B |
| Outputs | 1/4" |
| EQ | 3-band |
To Next Page