Need help?Do you have a question about the Fender American Standard Telecaster and is the answer not in the manual?
General| Neck Material | Maple |
|---|---|
| Fingerboard Material | Maple or Rosewood |
| Scale Length | 25.5 inches |
| Number of Frets | 22 |
| Controls | Master Volume, Master Tone |
| Pickup Switching | 3-Position Blade: Position 1. Bridge Pickup, Position 2. Bridge and Neck Pickups, Position 3. Neck Pickup |
| Hardware | Chrome |
| Body Material | Alder |
| Pickups | 2 Single-Coil |
| Nut Width | 1.685 inches |
| Finish | Polyurethane |
| Bridge | 6-Saddle American Standard Strings-Through-Body Tele with Bent Steel Saddles |
Allows you to control the volume level at the instrument.
Allows you to modify the instrument's tonal response.
Pickups are adjustable for height by turning adjustment screws.
Bridge features top load stringing system, strings inserted into slots.
Adjusts the height of each bridge section using screws.
Adjusts string length for perfect intonation based on harmonic comparison.
Procedure for re-adjusting the instrument when using different gauge strings.
Adjusts neck curvature (concave/convex) using an Allen wrench.
Details on the snap-in, torque-adjustable tremolo arm and its operation.
Adjusts the pitch of the neck to the body using neck plate screws.
Wipe down with soft cloth, use Fender Polish, avoid chemicals and extreme conditions.
Advice on warming up chilled instruments and avoiding sudden temperature changes.
Importance of changing strings to maintain sustain, treble, and intonation.
To Next Page
