Do you have a question about the Fender Standard Precision Bass and is the answer not in the manual?
Body Material | Alder |
---|---|
Neck Material | Maple |
Fingerboard Material | Rosewood or Maple |
Number of Frets | 20 |
Pickups | Standard Split Single-Coil Precision Bass |
Controls | Volume, Tone |
Hardware | Chrome |
Nut Width | 1.625 inches (41.3 mm) |
Scale Length | 34 inches (864 mm) |
Bridge | 4-Saddle Standard |
Strings | Fender USA, NPS, (Gauges .045 - .105) |
Precision Bass neck, Mexico, Right/Left hand configuration.
Plate used for mounting the neck to the bass body.
Main bass body available in solid paint or sunburst finishes.
Includes tuning keys, bushings, and mounting screws.
Bone nut for string placement and string retainer.
Nut and wrench for truss rod adjustment.
Strap button, mounting screw, and white felt washer.
Complete bridge assembly with plate, section, and screws.
Screws and springs for string intonation and height adjustment.
Neck and bridge position pickups for the Precision Bass.
Volume control pot, capacitor, and associated hardware.
Standard output jack for audio signal connection.