Fender Standard Jazz Bass User Manual

NECK P.U.
NECK P.U.
YELLOW WIRE FROM
BLACK WIRE FROM
CONTROL ASSEMBLY
STANDARD JAZZ BASS 0136500
12
16
.05 MFD
BRIDGE P.U.
BLACK WIRE FROM
YELLOW WIRE FROM
FROM BRIDGE
BLACK WIRE (GROUND)
BRIDGE P.U.
11
BRIDGE ASSEMBLY
21
19 20
11-8-99
Pg. 2 of 4
18

Fender Standard Jazz Bass Specifications

General

Body Material	Alder
Neck Material	Maple
Fingerboard Material	Rosewood or Maple
Fingerboard Radius	9.5 inches
Number of Frets	20
Scale Length	34 inches
Pickups	Standard Single-Coil Jazz Bass
Pickup Configuration	SS
Bridge	Standard 4-Saddle
Controls	Volume 1. (Neck Pickup), Volume 2. (Bridge Pickup), Master Tone
Hardware	Chrome
Width at Nut	1.5 inches
Strings	Fender USA, NPS

Summary

Control Assembly Wiring and Components

Neck Pickup Wiring

Details the black and yellow wire connections originating from the neck pickup.

Bridge Pickup Wiring

Details the black and yellow wire connections originating from the bridge pickup.

Ground Wire Connection

Specifies the black wire, identified as ground, connected from the bridge.

Control Components Identification

Identifies key control components including potentiometers, capacitor, and output jack.

Bridge Assembly Details

Bridge Saddle Adjustment Screws

Illustrates the screws used for adjusting the height and position of the bridge saddles.