Quick-Start Guide (continued)
Changing or adding effects (FX) to the bass tone
1. Change bass effects by holding down the FX button and turning the LARGE DATA WHEEL.
2. For more in-depth changes, press the FX MENU button. While in the FX TYPE menu, turn the LARGE DATA
WHEEL to hear the various bass effects (tip: try altering the parameters of an effect to create the sound you’re
looking for).
Factory-restoring the amp
1. Press the UTILITY MENU button repeatedly until you reach FACTORY RST.
2. Press SAVE to initiate a complete factory restore. All presets will be returned to the factory default settings (tip:
The “P” version of each preset is non-editable; hence, a factory restore will reset all of the “U” presets back to the
“P” versions).
2
To Previous Page
Loading...
