Need help?Do you have a question about the Fender BASSBREAKER 18/30 and is the answer not in the manual?
Combines instrument input and channel one volume/tone adjustments.
Adjusts volume and tone for the second amplifier channel.
Switches between amplifier channels and indicates active channel status.
Controls and indicators for amplifier power and standby modes.
Connects the amplifier to the power source via a grounded outlet.
Provides electrical over-current protection; requires specific type for replacement.
Outputs a line-level signal for effects or external equipment.
Connect external speaker enclosures for expanded sound.
Adjusts amp impedance for external speaker loads to prevent damage.
Connects the included channel-switching footswitch.
General| Type | Tube Amplifier |
|---|---|
| Power Output | 18W/30W |
| Channels | 2 |
| Effects Loop | Yes |
| Controls | Volume, Treble, Middle, Bass, Gain |
| Weight | 41 lbs (18.5 kg) |
| Tubes | 2 x EL84 |
| Footswitch | Optional |
| Speaker | 12" Speaker |
| Inputs | 2x 1/4" (High/Low) |
To Next Page
