Need help?Do you have a question about the Fender Bassman '59 and is the answer not in the manual?
General| Type | Tube Amplifier |
|---|---|
| Output | 45 Watts |
| Speakers | 4 x 10" Jensen P10R |
| Preamp Tubes | 3 x 12AX7 |
| Rectifier Tube | 1 x 5AR4 |
| Inputs | 4 (2 per channel) |
| Impedance | 4 Ohms |
| Channels | 2 |
| Controls | Presence, Bass, Mid, Treble, Volume (Bright Channel), Volume (Normal Channel) |
| Dimensions | 10.5" |
| Weight | 53 lbs |
| Power Tubes | 2 x 6L6 |
Covers essential safety precautions for operating the amplifier, including voltage, moisture, and ventilation warnings.
Explains the fuse's role in protecting the amplifier from electrical faults and proper replacement.
Details the operation of the power switch and standby mode for tube warm-up and lifespan.
Describes the function of the power indicator and how to replace its bulb.
Explains the PRESENCE, MIDDLE, BASS, and TREBLE controls for shaping the amplifier's tone.
Details the VOLUME BRIGHT and VOLUME NORMAL controls for adjusting channel loudness.
Describes the BRIGHT and NORMAL inputs, including gain differences and channel characteristics.
Details the power line cord connection requirements to a grounded AC receptacle.
To Next Page