Need help?Do you have a question about the Fender BXR 300C and is the answer not in the manual?
Power Amplifier Section| power output | 300 Watts |
|---|---|
| rated load impedance | 4 Ohms |
| input sensitivity | 1.33 volt R.M.S. |
Physical Specifications| width with rack ears | 19 inches |
|---|---|
| width without rack ears | 17 inches |
| height | 3.5 inches |
| depth | 10.125 inches |
| weight | 19 lbs. |
Preamp| input impedance input 1 | > 100k Ohms |
|---|---|
| input impedance input 2 | > 800k Ohms |
| sensitivity input 1 | < 10mV |
Physical Specifications| width | 21-7/8 inches |
|---|---|
| height | 29-11/16 inches |
| depth | 15-5/8 inches |
| weight | 78 lbs. |
| speaker | 1 -15" Fender Special Design |
Power Amplifier Section| power output | 300 Watts |
|---|---|
| rated load impedance | 4 Ohms |
| input sensitivity | 1.33 volt R.M.S. |
Preamp| input impedance input 1 | > 100k Ohms |
|---|---|
| input impedance input 2 | > 800k Ohms |
| sensitivity input 1 | < 10mV |
Warning to prevent fire or shock hazard by not exposing the unit to rain or moisture.
Covers Input jacks, Enhance, Bass, Treble, Mid, and Mid Frequency controls for sound shaping.
Provides recommended initial settings for the amplifier controls.
Lists technical specifications for the power amplifier section.
Details input impedance, sensitivity, and equalization range for the preamp.
Provides dimensions and weight for the BXR 300R and BXR 300C models.
To Next Page