Do you have a question about the Fender Deluxe IV and is the answer not in the manual?
Type | Tube Amplifier |
---|---|
Total Impedance | 8 ohms |
Output Power | 40 watts |
Preamp Tubes | 3 x 12AX7 |
Power Tubes | 2 x 6L6 |
Reverb | Spring Reverb |
Channels | 2 |
Tubes | 3 x 12AX7, 2 x 6L6 |
Controls | Volume, Treble, Bass, Speed, Intensity, Reverb |
Inputs | 2 x 1/4" (instrument) |
Outputs | 1 x 1/4" (speaker) |
Weight | 42 lbs (19 kg) |
Footswitch | 2-button footswitch included |
Normal sensitivity input ideal for use with most guitars.
Lower sensitivity input (-6dB) provides cleaner response.
Boost high-frequency tones of NORMAL channel.
Adjusts volume of NORMAL channel.
Boost gain and distortion of the DRIVE channel.
Increase DRIVE setting for more distortion and sustain.
Indicates active channel status (off, yellow, red).
Adjusts high-frequency tone.
Adjusts low-frequency tone.
Adjusts mid-frequency tone.
Selects NORMAL or DRIVE channel.
Adjusts loudness for DRIVE/MORE DRIVE channels.
Adjusts the level of the reverb effect.
Adjusts ultra high-frequency tone shaping.
Multi-functional input/output jacks for various configurations.
Connects footswitch for remote channel selection.
Illuminates when the unit is on.
Use for warming tubes or during short breaks.
Turns the amplifier on and off.
Connect to a grounded outlet.
Protects the unit from electrical faults.
Must always be connected when the unit is ON.
Wired in parallel with the main speaker jack.
Details about amplifier tubes and replacement.
Minimizes tube microphonics.