Fender Musical Instruments
7975 North Hayden Road, Scottsdale, Arizona 85258 U.S.A.
Since 1946, Fender realized the importance of your amplifier. You see, your amplifier
is more than just a combination of dials, wires and speakers. Your amplifier is a
musical instrument. And like any fine musical instrument, it should be treated with
special care and attention to detail.
At Fender, we know what building guitar amplifiers is all about. For over half a century,
we have been designing and producing some of the world's best amplifiers helping
shape the face of music. In fact, many of the world's most classic and best sounding
amplifiers have proudly worn the Fender name.
Whether you're after that classic Fender tone, a clean crisp sound for your Bass or
Keyboard or the raw driving power of modern distortion, your decision to purchase a
Fender amplifier is one you will appreciate with each passing note for years to come.
Wishing you years of enjoyment and a heartfelt thank you,
Bill Schultz
Chairman
Fender Musical Instruments Corporation
DESIGNATION TYPE PR 327
PART NUMBER 022-1270-000 (100 V)
022-1200-000 (120 V)
022-1230-000 (240 V) Aust
022-1240-000 (230 V) UK
022-1260-000 (230 V) Euro
POWER OUTPUT 14.5 W into 4 Ω @ 5%THD
with fresh battery
INPUT IMPEDANCE > 1 MΩ both channels
INPUT SENSITIVITY 500 µV@ 1 kHz - gain switch in
GUITAR 20 mV @ 1 kHz - gain switch out
INPUT SENSITIVITY 5.7 mV, 1 kHz
MICROPHONE
SPEAKER 4 Ω, 30 W Special Design 6” speaker
w/16 oz. magnet and paper coil former
(P/N 050543)
DIMENSIONS Height: 8.75 in 22.3 cm
Width: 7.75 in 19.7 cm
Depth: 6.75 in 17.2 cm
WEIGHT 13 lbs 5.9 kg
Amp Can
™
is a trademark of FMIC.
Fender
®
, Tone-Master
®
and Twin Reverb
®
are
registered trademarks of FMIC.
Product specifications are subject to
change without notice.
AMP CAN SPECIFICATIONS
7
To Next Page
Loading...
Need help?
General
