Fender RUMBLE 800 COMBO User Manual

NOTES: UNLESS OTHERWISE SPECIFIED.
PRINT IN BLACK OR GRAYSCALE ONLY 1.
USE 80LB UNCOATED COVER STOCK FOR THE FRONT 2.
AND REAR COVER PAGES
USE 20LB TEXT STOCK FOR INTERIOR PAGES 3.
NO BLEED PRINTING REQUIRED 4.
PAGE SIZE: 8 1/2 INCHES X 11 INCHES 5.
STAPLE BOUND 6.
SAMPLES OF FIRST PARTS MUST BE APPROVED BY 7.
FENDER R&D BEFORE STARTING PRODUCTION.QTY 3
UNLESS OTHERWISE SPECIFIED.
DO NOT PRINT
THIS PAGE
REVISIONS
REV. DESCRIPTION BY DATE
A
PART NUMBER SIZE
PRODUCT MANAGER
TITLE
REV
DATE
PROJECT ENGINEER
FENDER MUSICAL INSTRUMENTS CORP.
RESEARCH & DEVELOPMENT
CORONA, CALIFORNIA U.S.A.
THIS DOCUMENT CONTAINS INFORMATION OF PROPRIETARY NATURE TO FENDER
MUSICAL INSTRUMENTS AND IS SUBMITTED TO YOU IN CONFIDENCE AND SHALL NOT
BE DISCLOSED OR TRANSMITTED TO OTHERS WITHOUT AUTHORIZATION FROM
FENDER MUSICAL INSTRUMENTS
ANY PART SUPPLIED FOR USE
IN ANY FENDER PRODUCT
MUST CONFORM TO THE
EUROPEAN RoHS DIRECTIVE.
COPYRIGHT - 4/27/2021 -
FENDER MUSICAL
INSTRUMENTS CORP.
TITLEBLOCK REVISION: 2.1
DATE
PROJECT MANAGER DATE
A
MANUAL OWNER’S RUMBLE 800 COMBO
A
J.O.
PR 6106
7724487000
9.30.21
06-OCT-2021
10/06/2021

Fender RUMBLE 800 COMBO Specifications

General

Power	800 Watts
Headphone Output	Yes
Effects Loop	Yes
Type	Solid State
Effects	Overdrive
Cabinet Material	Lightweight Plywood
Outputs	XLR DI out
Controls	Gain, Contour, Vintage, Drive, Bass, Low-Mid, High-Mid, Treble, Master Volume
Dimensions	14" (35.6 cm) Depth
Speakers	2 x 10" Eminence Neodymium

Summary

Control Panel

Input and Gain Controls

Adjusts incoming signal level and preamp gain for optimal tone.

Voicing Filters

Includes Bright, Contour, and Vintage options for tone shaping.

Drive and Overdrive

Manages amplifier distortion and its associated volume level.

Four-Band Equalization

Adjusts overall tone and compensates for room acoustics.

Master Volume and Output Switch

Controls overall amp volume and output power levels.

Power and Status Indicator

Visual indicator for power status and operational modes.

Rear Panel Connections

Power Switch and Inlet

Controls amplifier power and connects to AC electrical outlet.

Speaker Output and Impedance

Connects external speaker cabinets and selects impedance.

Effect Loop and Aux Input

Connects external effects and audio players.

Headphones and Footswitch

Outputs audio to headphones and connects remote footswitch.

Line Out/Ground Lift

Balanced output for external devices and noise reduction.

Footswitch Operation

Thermal Performance and Protection

Block Diagram

Specifications